Looking for a stack plate, spacer or gym guide rod in Bangladesh? Start with the machine model and part measurements. We can review your details before discussing a matching part and quotation.
Two strength machines may both have black weight stacks, yet use different plate widths, guide-rod spacing, bushings and selector systems. The right replacement needs to suit the full assembly—not just look close in a photo.
These parts work together, but each has its own fit details. Tell us if you need one piece or a set.
Check plate length, width, thickness, marked load, the two rod holes and the centre selector opening. A weight marking alone cannot confirm fit.
Small sleeves and supports can affect how the stack sits and slides. Confirm their material, bore, outer size and position in the assembly.
Check rod diameter, full length, finish, end mounting and distance between rods. A rod that is close in length may still be unsuitable.
A phone photo of the full machine and the model label helps more than an isolated close-up.
Share the model label and, where available, the existing part number or parts diagram.
Record overall size, plate thickness and hole layout. Use a photo showing the whole plate face.
Measure each rod's outside diameter and the centre-to-centre distance between the pair.
Show the inside bore, outside shape and where the component fits on the machine.
Include the rod end fittings and top/bottom supports. Keep the machine unloaded and stopped for photos.
| Part | Send these details | Why it matters |
|---|---|---|
| Weight plate | Overall dimensions, guide holes, hole spacing, selector opening | Plates must sit and travel within the intended stack layout. |
| Guide rod | Diameter, length, end mounts, surface condition | The rod must locate in the frame and suit the bushings. |
| Spacer / bushing | Inside and outside dimensions, material, fitting location | A small difference may change alignment or contact. |
An uneven or noisy weight stack can have more than one cause. Plates may be misaligned, bushings may be worn, or a guide rod may be damaged. A cable or pulley issue can also affect movement.
Check the machine's make and model before replacing load-bearing parts. When motion feels unsafe, stop using the station and arrange a qualified inspection rather than testing it under load.
We have not listed a fixed price because genuine fit, part scope and current sourcing need to be verified before quoting.
One plate, a rod pair, one bushing or a group of matched components.
Part number, machining, finish and required dimensions.
Availability of a compatible part or any permitted alternative.
Whether professional fitting or transport is needed, subject to confirmation.
Use WhatsApp to explain which part is missing, worn or damaged. A clear reference set makes it easier to discuss compatibility and possible sourcing for gyms and home setups in Bangladesh.
WhatsApp: +880 1952-505137 · Compatibility, price and availability need confirmation.
No. Rod diameter, end mounting, guide-rod spacing and matching bushings can differ by machine. Send the model and full dimensions.
No. Selector pins and machine locks have their own category. This page covers stack plates, spacers, bushings and guide rods.
Do not use a machine with cracked plates, unsecured weights, damaged supports or unsafe stack travel. Ask for a qualified inspection.
Sometimes a photo helps identify the part family, but a reliable quote needs model, measurements and confirmed sourcing. Send more than one view if possible.
Need service advice as well as parts? Start with the machine model and a clear description of the problem.
Visit the Gym Servicing BD contact page