Need a bearing for a treadmill roller? Send the bearing code or the treadmill model, plus any known dimensions. Ask Gym Servicing BD to check a match, sourcing and the current price before you order in Bangladesh.
A roller bearing helps a treadmill roller turn around its axle. The bearing is not the roller, and it is not the walking belt.
Two bearings may look alike but differ in their inner hole, outer size, width, seals or fit. Check the full part code when you can. If the code is worn off, the roller model and accurate measurements matter even more.
Start with a photo of any code on the bearing's side. Then share confirmed dimensions if you have them. A ruler next to a part may help show scale, but it is not a substitute for an accurate fit check.
The full treadmill brand and model number often saves guesswork. A clear part marking can help narrow the options, but the suffix on the code may matter too.
Do not dismantle a roller just to get a measurement. Ask for qualified help if access needs tools or removal of a loaded assembly.
The size of the hole where the shaft passes through the bearing.
The outside size that must fit the roller or bearing housing.
The space the bearing takes along the axle, between its two faces.
| Check | What it tells us | Best source |
|---|---|---|
| Full bearing code | Helps identify the series and type; suffixes may describe seals or clearance. | Clear photo of the bearing marking |
| Bore, outside size, width | Checks fit with the axle and bearing seat. | Confirmed millimetre measurements |
| Front or rear roller | Shows which assembly uses the part. | Machine model or parts diagram |
| Seal and housing type | Helps avoid choosing a bearing that fits in size but not in specification. | Old part and model documentation |
Unusual roller noise or rough movement may point to several parts. The belt, roller, mounting and bearing should be assessed together before a replacement is selected.
The price cannot be confirmed from a photo alone. The exact specification, current sourcing, and any fitting work may change the total. Ask for these details to be stated clearly before proceeding.
Size, sealing, clearance and other variants must match the machine requirements.
A loose bearing is a different item from a bearing housing or complete roller assembly.
Availability is checked for the exact part. No item shown here is a live stock listing.
Ask whether these services are offered for your location and if charges are separate.
Returns, warranty terms and fitting arrangements must be confirmed with Gym Servicing BD for the item quoted. No unverified BDT price is displayed on this page.
Tell us which treadmill you have. Add any bearing code or measurements you know, and we can discuss the next compatibility check.
You do not need to remove a bearing or guess its code to start the enquiry. Send what you have and ask about sourcing, price, and the terms for the proposed part.
Not reliably. A full model number, part code and any confirmed dimensions make the check more useful. Different versions of a treadmill can use different parts.
No. Both are bearings, but they may have different codes, sizes or specifications. Tell us where the bearing came from before asking for a quote.
No. Noise can come from the belt, roller, motor or another part. Ask for a proper diagnosis before ordering a bearing on the basis of sound alone.
That may be a better route when the bearing is not sold separately or the roller housing is damaged. See the treadmill rollers page for that separate part type. Confirm its availability before ordering.
